what type of paint to use on plastic fender lip molding

Download Commodity

Download Article

Fender flares act as an extension to your fender, protect oversized wheels, and give your vehicle a unique await. If you lot like to customize your machine, yous may have idea virtually painting your fender flares a different color. Painting your fender flares is easy to exercise and requires spray paint, time, and some try. First, yous should consider all of your options, and then yous need to remove and set your flares before spraying them with a special automotive paint.

1. ane

   Use the paint code to detect an exact color match. If y'all want your fender flares to match the rest of your vehicle, yous can find the vehicle's paint code in the transmission or by contacting the car or truck manufacturer. Finding the paint code will allow you to exit and purchase the same exact color as the remainder of your car.^[1]

   • For example, Clover Green's color lawmaking for a 2000 Acura Integra is G-95P.^[2]

2. two

   Select a pigment lawmaking that matches your automobile'due south trim. Painting the car'southward trim the same color as your fender flares will requite your vehicle a uniform expect. Contact the vehicle's manufacturer or look inside of your user manual to find the color code for your vehicle's trim.^[three]

   • Painting your fender flares the same colour as the vehicle's trim will make them look like they came with the vehicle in well-nigh cases.
   • Modern vehicle paint is frequently fade-resistant.^[4]
   • If you think your auto's paint is fading, buffing the machine with a cleaning product will remove airborne contaminants and revive the luster of your pigment job.^[5]

   Advertising

3. 3

   Paint your flares a unlike colour for a bold look. If you are going for a more assuming or creative look, y'all tin paint your flares a completely different colour than the rest of your vehicle. Choose a bright fluorescent color for an upbeat feeling or a more muted color for a laid-dorsum expect.

   • If yous want your flares to stand out, select a color that contrasts with the vehicle'south paint task.
   • For instance, red, yellow, and white fender flares volition popular on a blackness car.
   • Black fender flares look proficient on a variety of different vehicle colors.

4. iv

   Purchase stencils for a custom look. Y'all can go out and purchase stencils that yous tin use to paint certain designs, such as flames, on your vehicle'south fender flares. Wait for these stencils online or at automotive shops.^[six]

   • Examples of stencils you can use include stars, letters, or something that blends in with an existing custom paint job.

5. 5

   Buy an enamel or polyurethane automotive pigment. It'south important that you don't use traditional spray paint to paint your fenders or it may not look expert. Instead, go online or to an automotive store and buy an enamel or polyurethane automotive paint and primer. These paints will come in a spray paint class. If you're unsure of what to purchase, enquire a store associate for help.^[7]

   Advertisement

1. 1

   Remove the fender flares from the vehicle. Fender flares are attached to your car by bolts inside of your bike well. To remove them, unscrew all of the bolts connecting the fender flare to the vehicle with a socket wrench. The fender will still be attached to the motorcar by modest plastic clips, but these clips tin can be detached easily by pulling the fender abroad from your vehicle.^[viii]

2. 2

   Drapery a tarp and tape off your flares if y'all don't want to detach them. Keep in mind that if you don't disassemble your fender flares, you can just paint the outside of them. Utilise electrical tape along the area where the fender flares and automobile meet. Drape a large piece of plastic over your motorcar and apply another piece of tape along the edge of the tarp so that it protects areas of your vehicle that you don't want to paint.^[ix]

3. 3

   Clean the outer surface of the flares with degreaser. Dust on the flares will crusade the paint to cleft and peel. Use an all-purpose automotive degreaser to thoroughly wipe downwards the outer surface of the flares.^[10]

   • Do not use a lacquer thinner reducer as your degreaser because information technology will make the flares hard to paint.

4. 4

   Sand downwards the fender flare with 200 grit sandpaper. Motion in a back and forth motility over the surface of your fender flares. Effort to work out any imperfections or bumps in the flares and then that the surface is as smooth equally possible.^[11]

   • Y'all can also exercise a light sanding with a 2000 grit Scotch Brite pad if you're worried that you'll scratch your fender flares.

5. 5

   Wipe the surface downward with a tack cloth. Wipe down the area with a tack fabric to remove any debris or dust that was created from sanding. Brand sure that you get all of the dust off or it will be trapped under the pigment.^[12]

   Advertisement

1. 1

   Spray primer onto the surface of your fender flares. Lay the flares downwards on a piece of plastic or newspaper so that you don't get pigment on your floor. Hold the primer can ane–ii inches (ii.5–v.1 cm) away from the flares and button the button on the top of the can. Motility your arm in long sweeping motions and try to cover every bit much of the flare as you can in one sweep. Go on spraying the flares with the primer until you've applied a total coat.^[thirteen]

   • If you've discrete the flares, spray a coat of primer inside the interior of the fender flares.
   • Piece of work in a well-ventilated area and wear a respirator when using spray paint.

2. 2

   Let the primer dry for at to the lowest degree 30 minutes. After 30 minutes, the flares should be dry to the touch. Run your hand across the surface of the flares and make sure that they are dry before moving on.^[14]

   • The surface may feel sticky, but the primer shouldn't come off on your hands.

3. 3

   Apply spray pigment to the fender flares. Concur the spray paint ane–ii inches (2.5–5.1 cm) away from the flares and press the button on the meridian of the can in long, sweeping strokes. Proceed to cover the entire surface of the fender flares until you lot've applied a unmarried coat.

   • Avert spraying in small, short bursts or your flares may get a splotchy look.

4. 4

   Let the paint dry for an 60 minutes. The surface of the flares should exist dry, and paint should not transfer onto your mitt when you bear upon it.^[15]

5. five

   Apply additional coats of spray paint to the flares. Use the second coat of paint the same mode you applied the first coat. This glaze will make the paint appear darker and richer than information technology did with simply a unmarried coat. Let the fender frames dry and echo the process until your fender flares are the hue that y'all want.^[16]

6. six

   Let the paint dry overnight. The paint and basecoat should be completely dry out the side by side solar day. If y'all're happy with a plain base glaze, y'all're done painting your fender flares. If you want to farther particular your flares, you'll need to tape stencils to the flares and apply more paint.^[17]

   Advertisement

1. 1

   Tape your stencils in place. Position the stencil over the area where you'd similar the design to become. Then, apply painters tape to the outer edge of the stencil to hold it in place.^[eighteen]

   • Make sure that the stencil is firmly in identify so that it doesn't shift around when you offset to paint.

2. ii

   Apply paint over the stencils to fill up them in. Hold the spray pigment 1–2 inches (2.five–5.1 cm) abroad from the fender flares and use brusk accurate bursts to fill up in the stencil. Continue to do this until y'all've filled in the unabridged stencil with a coat of paint.^[19]

   • It's of import that y'all don't get outside of the outer edges of the stencil or your custom paint task will look sloppy.

3. 3

   Add additional coats to deepen the color. Allow the paint to partially dry for 30 minutes to an hour and utilize some other coat using the same technique. Repeat the process until the color inside of the stencil is the hue that you desire.^[20]

4. 4

   Remove the stencils and allow the pigment dry overnight. Carefully peel dorsum the record you used to hold the stencil in place and remove the stencil from the flares. Be careful not to smudge the paint equally yous do this. The automotive spray paint requires a full 24-hour period to dry off.^[21]

   • Don't await to remove the stencil or the paint may crevice or peel if it's immune to fully dry.

   Advertizing

Inquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

Things You'll Need

• Socket wrench
• Tarp
• Automotive degreaser
• 200 dust sandpaper
• Tack cloth

• Automotive primer
• Enamel or polyurethane automotive spray paint
• Tarp or plastic sheeting
• Respirator

• Painter's tape
• Painting stencil
• Enamel or polyurethane automotive spray paint

Nigh This Article

Thank you to all authors for creating a page that has been read 19,117 times.

Did this commodity help y'all?

dupuissavoid.blogspot.com

Source: https://www.wikihow.com/Paint-Fender-Flares

Share this post